I've inherited a schematic and board where the schematic was created using hierarchical blocks for some circuits that are 6 or eight implementations of the given circuit. I've only dealt with flat schematics. I can't seem to figure out how to print the schematic so that the schematics that are the actual hierarchical circuit pages will print enough pages to show the references designators for each implementation of the circuit. Sorry if my verbiage is not accurate but this is strange territory for me. ![]()
What I get is 15 pages of schematic where I am expecting about 30. On the printout there is only one page for each different hierarchical circuit. What do I need to do to get the schematic to print all of the hierarchical circuitty with reference designators so the the schematic and the resulting board match?