Hello all,
I'm running OrCAD 16.5 and am having a problem generating an Allegro netlist. Creating a Tango or ComputerVision format netlist works fine. The Allegro netlist operation fails with the following messages for all simple parts:
#1 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on C10 and C1 for part "CAP_SMT".
PCB Footprint
VALUE
C1 gives this error for C2 through C11.
3 180-REG-001644 CAP_SMT 4.7uF CC1210 10% 16V C1,C6,C7
8 180-REG-001618 CAP_SMT 0.1uF CC0402 10% 16V C2,C3,C4,C5,C8,C9,C10,C11
I've been using OrCAD since about 1987, so am fairly comfortable with the product. However, I haven't tried to generate an Allegro netlist for several years.
I'd appreciate any pointers as to what is causing this error, and if there is a solution I can implement.
I'd prefer not to delete all of the properties I've added, as they help with the BOM generation in Excel.
Thanks in advance for any recommendations.
Cheers,
Ralph