Hello!
Wondering if someone might have advice on how to fix this issue I'm seeing. I have a custom pad shape that when placed on the PCB the ratsnest (and therefore trace) do not connect in the correct location.
Note the attached image showing ratsnest connecting to middle of pad geometry, however, there is no pad there to connect to.
Here's the part with the trace routed (again, note the incorrect connection point).
(please note all images of the part on the bottom side of the pcb).
I've modified the design padstack to have the origin of the pad and stop mask to be the thicker portions of the pads, however, it had zero impact on the connection point. Is there a way to fix this?
I've attached the pads and parts in the zipfile. Also, as a reference this is the part I'm using http://www.bourns.com/docs/Product-Datasheets/SRR6038.pdf
(Please visit the site to view this file)