I have a dual LED part (Avago HSMF-C16x) [https://docs.broadcom.com/docs/AV02-0584EN] with one LED being pin 1 Anode and Pin 3 Cathode, the other LED is pin 2 Anode and Pin 3 Cathode.
I created a 2 section part the first part symbol is an LED with pin 1 anode and pin 3 cathode.
The second section is pin 2 anode and pin 4 cathode.
Downloaded the first footprint from SamacSys
I use these settings for my netlist.
and I get this error...
and this is the session output...
------ Oversights/Warnings/Errors ------
#1 ERROR(SPMHNI-191): Device/Symbol check error detected.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C163_HSMF-C163_HSMF-C163' is missing pin '1'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C163_HSMF-C163_HSMF-C163' is missing pin '3'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C163_HSMF-C163_HSMF-C163' is missing pin '2'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C163_HSMF-C163_HSMF-C163' is missing pin '4'.
#2 ERROR(SPMHNI-191): Device/Symbol check error detected.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C169_HSMF-C163_HSMF-C169' is missing pin '1'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C169_HSMF-C163_HSMF-C169' is missing pin '3'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C169_HSMF-C163_HSMF-C169' is missing pin '2'.
ERROR(SPMHNI-195): Symbol 'HSMF-C163' for device 'HSMF-C169_HSMF-C163_HSMF-C169' is missing pin '4'.
Here is section 1 of my symbol
and here is section 2
I have tried 2 different footprints and get same results, here is the currently set footprint showing what pin 1 is set to...
i run the mouse over 2, 3 and 4 and they all verify to be the correct pin numbers.
Any help anybody can provide would be appreciated.