Hi,
I am trying to use Bus pin capability for creating schematic symbols in OrCAD 16.6 like below picture:
and connected bus from FPGA to it in schematic like below:
However, it fails during netlist creation and I receive mass of errors like below:
#1 ERROR(ORCAP-36036): Multiple pin [25..27]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#2 ERROR(ORCAP-36036): Multiple pin [25..27]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#3 ERROR(ORCAP-36036): Multiple pin [25..27]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#4 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#5 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#6 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54)
.
Check for incorrect packaging of all devices in U1.
#7 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#8 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#9 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#10 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#11 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#12 ERROR(ORCAP-36036): Multiple pin [31..39]'s which have differe
nt nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#13 ERROR(ORCAP-36036): Multiple pin [42..44]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#14 ERROR(ORCAP-36036): Multiple pin [42..44]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#15 ERROR(ORCAP-36036): Multiple pin [42..44]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#16 ERROR(ORCAP-36036): Multiple pin [52..54]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#17 ERROR(ORCAP-36036): Multiple pin [52..54]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#18
ERROR(ORCAP-36036): Multiple pin [52..54]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#19 ERROR(ORCAP-36036): Multiple pin [49..50]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#20 ERROR(ORCAP-36036): Multiple pin [49..50]'s which have different nets connected for U1: SCHEMATIC1, 01-DDS (203.20, 2.54).
Check for incorrect packaging of all devices in U1.
#21 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.
I really appreciate any help in this regard,
Hossein