Hi,
Among the components in my layout, I have a transformer and an electrolytic capacitor (see picture).
All the nets are routed, except this one. I've tried to think about everything - but for some reason, Allegro insist to keep them unrouted.
In layer #2 (Power), colored in yellow, there is a shape that covers them both, incluting thermal releif. It seems that they must be routed: both pins and shape in the same net name.
I have also checked the padstack of those 2 pins - both are defined well to all the layers.
At the top layer (green), the transformer pin also connected to SMT capacitors - very well.
What do you think?
