Clik here to view.
Controlling the change of color on footprint when mouse hovered above.
Normally when the mouse is hovered above the footprint, the pad quickly changed color. However I notice in another system, the color changed regardless whether the mouse is hovered above. It slows down...
View ArticleClik here to view.
How to fix impedance mismatch?
In constraint manager I set the value for impedance and make all nets close to certain tolerances. Then I it auto route and have bunch of impedance mismatch DRCs1)I thought its constraint driven...
View ArticleClik here to view.
how to find arm ic's
sir, i have to design arm project so i need the arm controller from orcad.. can any one help me?
View ArticleClik here to view.
Chose of parameters CMOS
Hello,I work on current conveyor circuits in the 0.35μm technology in orcad, and I would know what are the criteria for choosing the right parameters for NMOS and PMOS transistors among those present...
View ArticleClik here to view.
Is there a way to output a Gerber drill layer from Allegro
As titled, is there a way to export drill data in Gerber format rather than Excellon directly from Allegro?
View ArticleClik here to view.
안산오피 ★오피클럽쩜COM★ 천안오피●강남오피
청순끝판왕!! 명품 바디라인 21/164/B컵 중독성 매력 그자체▶OPCLUB07.COM◀경기오피▶OPCLUB07.COM◀ 강북오피▶OPCLUB07.COM◀ 오피클럽 정말 흥분되는 몸매에 이쁘장한 외모 겸비~섹시함과 청순함 오피콜▶OPCLUB07.COM◀경기오피▶OPCLUB07.COM◀ 강북오피▶OPCLUB07.COM◀ 오피클럽 피팅모델 출신 색끼가...
View ArticleClik here to view.
Update edited symbol in .olb library
Hello1st I put a symbol from lib1.olb.The location of pins were not adapted for my schematic, so I changed it (right-click on symbol --> "Edit Part").Is there a technique to update edited symbol in...
View ArticleClik here to view.
Importing a DXF shape for use as a Package Keepout
Hi,I am laying out new circuitry on an existing PCB shape. I have been given DXF files of the board shape and a package keepout area. I was able to import the board outline, but I am having trouble...
View ArticleClik here to view.
the package exported from the .brd file is different
hi all, i revised the package in the .brd file,and want to save it in my package lib,use the command export--libraries,open the exported .dra file,found the package is different from the one in the...
View ArticleClik here to view.
Absolute and Relative coordinates displayed together.
There is a way to display Absolute and Relative coordinates together in OrCAD PCB Designer Professional ?In most cases when i move a symbol or other object, i need to know the absolute coordinates, but...
View ArticleClik here to view.
Need clarification on net length(etch) report
Hi all,i need some clarification on length report which we will get it from allegro.As i observed we are getting a etch report which includes only the trace length(in allegro etch length).For example i...
View ArticleClik here to view.
Does a DSN file contain everything required?
I sent my PCB editor a DSN Capture file for PCB routing.He says that it arrived with no components - he sees all wires but none of the componentsAll my components are from private libraries and do not...
View ArticleClik here to view.
천안오피＼＼う▷【 opclub07。COM 】◁っ＼＼오피클럽
천안오피＼＼ぬ▷【 opclub07。COM 】◁じ＼＼강남오피＼＼수유오피＼＼ん▷【 opclub07。COM 】◁ざ일산오피 / 대전오피 / 수원오피 / 오산오피 / 평택오피 / 강북오피 / 영등포오피 / 수유오피 / 선릉오피 / 천안오피 / 광주오피 / 대구오피 / 부산오피 / 부천오피 / 부평오피 / 포항오피 / 울산오피 / 안산오피 / 청주오피 / 평촌오피 /...
View ArticleClik here to view.
Dynamic Reconnect during move component.
In PCB Designer Professional, when i move the symbols, the ratsnests are reconnected only after the symbol are placed. There is a way to reconnect the ratnests to the near points but during move...
View ArticleClik here to view.
Allegro Free Viewer 16.6 application alert
Hi,I'm installing the allegro Free Viewer 16.6 on a few windows 7 64 machines. When I launch the program as a normal user (without admin rights) i get this error:E-...
View ArticleClik here to view.
Comparing design netlist with PCB netlist
Dear All,I need to compare the netlist generated by an Orcad design, with the netlist generated from the PCB file.The PCB design was done using CADSTAR design editor.This is needed to check if there is...
View ArticleClik here to view.
Looking for some footprints:
Does anyone know if these footprints or schematic symbols exist, and under what name?sub miniature toggle switchesstandard tact switches5 pin din (aka MIDI jack)1/4 neutrik jacksstandard pcb mount dc...
View ArticleClik here to view.
Swappable gates for heterogeneous parts
Is it possible to create Swappable gates for heterogeneous parts in Capture. I found the PARTGROUP property was added in 16.6, but I can't find any documentation on how to use it...Jerome
View ArticleClik here to view.
footprint listing?
Is there a reference listing anywhere of what footprints and schematic symbols there are?
View ArticleClik here to view.
what character are not supported on Artwork films?
what characters are not supported on artwork films?
View Article